Loading...
 Start Page
Language selection: English Deutsch Français
Language selection: English Deutsch Français
 
Snow Ploughs
 

Snow Ploughs

 

One of the core areas of ZAUGG’s business is the development, design and manufacture of high quality, technically advanced snow ploughs for snow clearance on all roads and driveways as well as at airports.

The ploughs can be easily attached to single-axle vehicles, all types of tractor, municipal and all-wheel-drive vehicles from a wide range of manufacturers, skid-steer loaders and forklift trucks, vans, Unimogs, trucks, wheel loaders and airport snow-clearance vehicles.

They are available in no less than 16 models, each with a range of different plough widths. The normal blade angle is 35° (32°), although most models are available with a 45° angle or even 55° on certain models.

In terms of performance and operation, they are designed to cope with the demands of snow clearance today. Snow removal is remarkably easy, with great savings in fuel. The driver enjoys an exceptionally good overview thanks to the optimum plough height. And the ZAUGG trip edge system (obstruction impact protection system) enables clearance speeds of up to 60 km/h without detriment to safety.

 

Snow plough G3

This small snow plough was mainly designed for the cost-effective clearing of pavements, factory grounds and narrow streets. It can be mounted on small tractors with engine outputs of up to around 30 kW, small municipal service vehicles or single-axle machines.

Plough Length

125 - 180 cm

 

 

 

Snow plough G6

The snow plough G6 is the smallest snow plough equipped with the patented ZAUGG trip edge system. It is particularly notable for its simple and robust construction and is especially suited for use on narrow-gauge tractors with engine outputs of up to around 40 kW, municipal service vehicles, skid-steer loaders, 4-wheel-drive vehicles and forklift trucks.

Plough Length

160 - 220 cm

Number of elements

1 element

 

Snow plough G8K

The snow plough G8K is equipped with the ZAUGG trip edge system. Thanks to the plastic glide surface and the split plough blade this snow plough can be used with minimal wear and tear to the carrier vehicle. It is most commonly used on municipal service and 4-wheel-drive vehicles.

Plough Length

160 - 240 cm

Number of elements

2 elements

 

Snow plough G16

The snow plough G16 impresses with its low weight and is equipped with the ZAUGG trip edge system.

Plough Length

220 - 300 cm

Number of elements

2 elements

 

Snow plough G21

The snow plough G21 has been built for snow clearance on roads with varying road surface characteristics and transitions. The ZAUGG trip edge system guarantees safe driving over obstacles, even at high speed. As usual, the G21 has a shock-absorbing plough blade that is split both vertically and horizontally and is thus designed for high performance, ease of operation and safety. 

Plough Length

240 - 300 cm

Number of elements

2 elements

 

Snow plough G32

The snow plough G32 is equipped with the ZAUGG trip edge system and guarantees safe driving over obstacles. The open plough blade provides optimum snow flow.

Plough Length

280 - 400 cm

Number of elements

2 - 4 elements

 

Snow plough G33

The snow plough G33 is equipped with the ZAUGG trip edge system and is suited to the use in the lowlands or in the mountains. 

Plough Length

260 - 390 cm

Number of elements

2 - 3 elements

 

Snow plough G44

The snow plough G44 snow plough was primarily developed to tackle the heavy snowfalls encountered in mountainous regions and is equipped with the ZAUGG trip edge system. It can be generally be mounted on vehicles with big power, for example wheel loaders weighing 8.5 tonnes.

Plough Length

340 - 450 cm

Number of elements

4 - 5 elements

 

Snow plough G40K

The snow plough G40K was specially developed for use in densely populated regions and is equipped with the ZAUGG trip edge system. With its low overall height and tightly curving closed plastic blade shape, which guarantees optimum snow flow, the G40K is ideally suited for use in urban areas. Equipping the snow plough with the lateral swivel unit makes child›s play of snow clearing on tight roundabouts and in narrow passages. These special accessories enable the snow plough to be positioned in the centre of the vehicle, minimising the passage width required.

Plough Length

300 - 400 cm

Number of elements

3 - 4 elements

 

Snow plough G50K

The snow plough G50K was developed for use on highways and is equipped with the ZAUGG trip edge system. The closed shape guarantees optimum snow flow. Optional the plough can be equipped with the lateral swivel unit and allows entrance in narrow passages.

Plough Length

330 - 550 cm

Number of elements

3 - 5 elements

 

Snow plough VARIO 4

The snow plough Vario 4 is equipped with the ZAUGG trip edge system. It is mainly used on motorways and at airports, where the need is for the maximum possible clearance. This unilateral plough model can be opened and closed in the upper section of the plough blade and allows the snow clearance with different speeds.

Plough Length

340 - 600 cm

Number of elements

4 - 6 elements

 

Side plough SSR

The side plough SSR allows in combination with a front snow plough an bigger clearance width. It is equipped with parallelogram lifter and swivel cylinder which fit the VSS attachment plate size B and enables compact lateral attachment to trucks.

Plough Length

250 - 300 cm

 

 

 

Side-blade snow plough SFR-G22K

This snow plough has a plastic glide surface and theopen blade shape provides optimum snow flow. The ZAUGG trip edge system guarantees safe passage over obstacles. It is equipped with parallelogram lifter and swivel cylinder which fit the VSS attachment plate size B and enables compact lateral attachment to trucks.

Plough Length

300 - 390 cm

Number of elements

2 - 3 elements

 

Side snow plough SG50K

A clearing width of up to 7.5 m is possible in combination with a front snow plough G50K-550-5-45°+10°. The ZAUGG trip edge system guarantees safe passage over obstacles. The parallelogram lifter and swivel cylinder are supported on an EN15432 F1 attachment plate and enable compact lateral attachment to a truck. The plough base is equipped with a plastic plate and the round, closed blade shape ensures the optimum flow of snow.

Plough Length

440 cm

Number of elements

4 elements

 

Snow plough SP3000

The snow plough SP3000 was specially developed for use on airports. It is characterised by its width, simple design and the low weight. It is equipped with the ZAUGG trip edge system.

Plough Length

560 - 800 cm

Number of elements

4 - 5 elements

 

SnowShark

The wedge-shaped plough is optimal for the rapid and simple clearance of snow around the runway and taxiway boundary lighting at airports and airfields.

Plough Length

300 cm

 

 

 

Snow plough mounting devices

 

 

 

 

 

 

Snow plough accessories and options

 

 

 

 

 

 

Snow plough controllers

 

 

 

 

 

© Copyright 2021 ZAUGG AG EGGIWIL