Snow blower - ZAUGG AG EGGIWIL

Snow blower

selected projects

x

Snow blower SF 72-70

The snow blower clears the snow above the track (from 10 mm above the ToR) with extended snow blowing units up to a width of 4.55 m or with retracted snow blowing units up to a width of 3.15 m and a height of approx. 1.3 m.

The two units can each be driven outwards by 700 mm, independently of each other. With the lifting device,
each snow blower can be raised individually to 600 mm
above ToR (measured from the lower edge of the snow blower).

The snow blower is equipped with a wearable steel blade. The distance of the wearable blade from the top of rail can be set by adjusting the vehicle’s lifting device.

Technical Data

Cutter reel diameter	Ø 720 mm
Centrifugal wheel diameter (incl. automatic safety clutch for the centrifugal wheel in case of overload)	Ø 700 mm
Clearing width, blower unit retracted	3’150 mm
Cutting/clearing width «1st cut»	3’150 mm
Clearing width, blower unit extended	4’550 mm
Clearing height (from ToR, unit fully lowered)	1’030 mm
Required output	170 kW
Clearing capacity	approx. 1’940 t/h
Weight (Snow blower incl. lifting device)	approx. 2’500 kg

Snow blower SF 115-125

The snow blower clears the snow above the track with extended snow blowing units up to a width of 4.80 m or with retracted snow blowing units up to a width of 3.12 m and a height of approx. 1.6 m.

The two units can each be driven outwards by 900 mm, independently of each other. With the lifting device, each snow blower can be raised to 500 mm above ToR.

Technical Data

Cutter reel diameter	Ø 1’150 mm
Centrifugal wheel diameter (incl. automatic safety clutch for the centrifugal wheel in case of overload)	Ø 1’250 mm
Clearing width, blower unit retracted	3’000 mm
Clearing width, blower unit extended	3’150 mm
Clearing height (from ToR, unit fully lowered)	1’600 mm
Clearing height (from ToR, unit fully raised)	2’100 mm
Required output	300 kW
Clearing capacity	approx. 3’000 t/h
Weight (Snow blower incl. lifting device)	approx. 4’500 kg