Snow Blowers
Snow blowers from ZAUGG offer the right solution, adapted to the requirements, for every carrying vehicle. Thanks to the ZAUGG modular system, the basic configurations can be equipped with individual driving and operating equipment. The snow blower model to be used depends on the carrying vehicle.
The ZAUGG snow blower is a combined/dual stage construction with cutter reels and an impeller. The two components are perfectly matched to each other via gearboxes and transmissions to enable effective and economical working.
Snow blower SF 40-42
The snow blower is the clearing device for single-axle vehicles and small tractors. The SF 40 is characterised by low weight and its impeller is protected.
Snow blower SF 55-45
The snow blower is ideally suited for use with small tractors or small implement carriers. The impeller is protected and the it is equipped with lateral bearings from a width of 150 cm.
Snow blower SF 55-52
The snow blower is ideally suited for use with small tractors or small implement carriers. The impeller is protected.
Snow blower SF 65E-60
The snow blower is suitable for a wide range of different carrier vehicles. It is equipped with lateral cutter reel supports and protection against overload is provided by shear bolts or shut-off clutches (optional) in the cutter reels.
Snow blower SF 65-60 G (from winter 2024/25)
The SF 65-60 G snow blower is the first model to be equipped with the new, patented blade suspension system. When driving over obstacles, the snow blower is prevented from lifting and impacts are absorbed. This significantly reduces the load on the carrier vehicle and the attachment.
Snow blower SF 72E-70
The snow blower is the simpler version of the type SF 72 with lateral bearings for the cutters. The cutters are protected by shear bolts or, depending on the width, with cut-out clutches in the cutters.
Snow blower SF 72-70 KS
The snow blower offers with a hinged scraper blade extended safety and maximum protection of the cutter and the carrier vehicle when traversing obstacles. The cutter reels are optionally safeguarded by means of shear pins or cut-out clutches.
Snow blower SF 90-70
The snow blower is conceived for a wide range of different carrying vehicles. Protection against overload is provided by automatic cut-out clutches in the cutters. The snow blower is available with hinged scraper blade.
Snow blower SF 90-85
The snow blower is conceived for a wide range of different carrying vehicles. Protection against overload is provided by automatic cut-out clutches in the cutters. The snow blower is available with hinged scraper blade.
Snow blower SF 90-100
The snow blower is conceived for a wide range of different carrying vehicles. Protection against overload is provided by automatic cut-out clutches in the cutters. The snow blower is available with hinged scraper blade and is optionally equipped with a revolving impeller housing.
Snow blower SF 110-100
The snow blower is specially designed for mounting on large implement carriers. Protection against overload is provided by automatic cut-out clutches in the cutters. The snow blower is supplied as standard with a revolving impeller housing and can optionally be equipped with a hinged scraper blade.
Snow blower SF 110-125
The snow blower is specially designed for mounting on large implement carriers. Protection against overload is provided by automatic cut-out clutches in the cutters. The snow blower is supplied as standard with a revolving impeller housing and can optionally be equipped with a hinged scraper blade.
